|
|
| 行业资讯 >> 资讯展示： |
1C31189G01 1C31192G01 |
| 时间：2015-09-16 类别： 行业动态 |
1C31189G01 1C31192G01
1C31189G01 1C31192G01 1C31189G01 1C31192G01 ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ ◆品牌热点ABABB施耐德GE西门子发那科FOXBORO西屋 爱价格好++++++++贸+++++++++++++疯狂降价 爱货期短+++++++++++++++++++渠道好 爱产品好+++++++++易++++++++++原装进口 爱数量多+++++++++++++++++++++大量库存停产备件 爱售后服务好+++++++商++++++++++++质量保证 ◆联系人：吴工[销售工程师] ★联系电话：0592-5072236 * 18965131356 ★联系QQ：1665532815 ★公司传真：0592-5072083 ★公司全称： 厦门航拓电气有限公司 ★公司地址： 厦门市思明区仙岳路582号嘉怡园16楼A单元 ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ 系统应设有专用的蓄电池放电回路，其直流空气断路器容量应满足蓄电池容量要求。 如采用高频开关电源模块应满足下列要求 N+1配置，并联运行方式，模块总数宜不小于3块。 监控单元发出指令时，按指令输出电压、电流，脱离监控单元，可输出恒定电压给电池浮充。 可带电拔插更换。 软起动、软停止，防止电压冲击。 结构与元器件的要求 结构要求 柜体外形尺寸(柜体外形尺寸是指柜体框架尺寸)应采用以下两种之一，根据需要，柜的宽度和深度可取括号中的调整值。 2200mm×800(1000、1200)mm×600(800)mm(优选值)(高×宽×深)； 2300mm×800(1000、1200)mm×550(800)mm； 高度公差为±2.5mm，宽度公差为0～-2mm，深度公差为±1.5mm。 柜体应设有保护接地，接地处应有防锈措施和明显标志。门应开闭灵活，开启角不小于90°，门锁可靠。门与柜体之间应采用截面不小于6 mm2的多股软铜紧固连接应牢固、可靠，所有紧固件均具有防腐镀层或涂层，紧固连接应有防松措施。 Model P90 server supports a USB mouse or optional USB trackball, an alphanumeric keyboard, up to two annunciator keyboards, or annuciator panels, and up to four video monitors. The P90 server also supports multiple optional touchscreens. The Model P90 server has an Intel Xeon? processor and can be configured with up to 1.2 TB of internal hard disk storage and up to 4 GB of ECC DDR-2 SDRAM. The serial attached SCSI (SAS) supports a system disk, expansion disks, or RAID1 or RAID5 hard drive arrays. Client/Server communications are accomplished using the TCP/IP networking protocol. AP50/51 PWs WP20/30 AW/WP50/51 AW/WP70s P79, P80, P81 P91 P82 Cluster I/O 200 Series I/O See Chart below for 200 Series part #s The 200 Series Field Bus Modules are the latest generation I/A Series I/O modules. The DIN rail mounted FBM subsystem provides a reliable, high speed communications interface between the host control processor (for example the I/A Series control station) and field I/O sensors and actuators. It incorporates innovative equipment packaging, and the use of fiber optic and/or coaxial cabling between modules to allow local or remote distribution of process I/O points. The DIN rail mounted Fieldbus Modules (FBMs) are compact, high-performance distributed process I/O modules. They perform the signal conversion required to interface the electrical input signals to/from the field sensors to the optionally-fault-tolerant I/A Series control station. Communication between the FBMs the I/A Series control station is via Fieldbus Communication Modules (FCMs), which interface the 2 Mbps module Fieldbus used by the FBMs with the 10 Mbps Ethernet trunk Fieldbus used by the I/A Series control station. The FBMs automatically accept communication from either communication path (A or B) of the redundant Ethernet trunk Fieldbus. Thus, if one path fails, communication is not interrupted. 100 Series I/O V4.3 The Ethernet MESH Network (V8.x) S20 The Mesh Network represents the next revolutionary step of the I/A Series Control Network functionality, Version 8.0 release introduces unprecedented communications capability, versatility and performance to I/A Series process automation systems. The Mesh network structure provides alternate 资讯来源：厦门航拓电气 |
友情提示： 信息由用户自行发布，采用请谨慎，我们鼓励您当面交易。如有不符合法规或造成侵权，请及时通知本站更正或删除，具体联系方式见页面底部联系我们。名站在线只为传递信息，我们不做任何双方证明，也不承担任何法律责任。 信息转载，请标明来源于www.fwol.cn ,谢谢。 |
| 其它相似链接： |
| 相关评论： |
|
|
电脑版 |
