|
施工要点
Key points of construction
1.清水漆的施工规范要求
Standard requirements for construction of 1. clean water paint
打磨木质基层是涂刷清漆的最重要工序,应首先将木质表面的尘灰、油污、杂质**干净。上润油粉也是清水漆制作的重要工序,在施工时应用棉丝蘸油粉涂抹在木制的表面上,用手来回揉擦,将油粉擦入到木质基层上。涂刷清油时,手握油刷轻松自然,手指轻轻用力,以移动不松动、不掉刷为准。涂刷时应按照蘸次要多、每次少蘸油、依照先上后下、先难后易、先左后右、先里后外的顺序和横刷竖顺的操作的方法施工。
Grinding wood base is the most important process of painting varnish. First, it should clear the dust, oil and impurities on the wood surface. An important process maxshare oil powder water paint production, application of cotton yarn dipped in oil powder in the construction onto the wooden surface, rubbed his hand back and forth, will wipe oil powder into the wooden base. Besmear brushs oil, hand youshua relaxed, fingers gently to move, not loose, not brush prevail. When painting, it should be done in accordance with the following methods: first, first, then, the next, the first, the next, the first, the left, the right, the outside and the outside.
2.木质基层混水漆的施工规范：木质基层处理时,除清理基层上的杂物外,还应对局部的腻子嵌补,打砂纸时要顺着木纹打磨。在涂刷面漆前,应用漆片(虫胶漆)对有较大色差和木脂的节疤处进行封底处理。需在基层涂干性油或清泊,涂刷干性油层要所有部位均匀刷遍,要做到满刷,不能漏刷。底子油干透打磨后,满刮**遍腻子,干后以手工砂纸打磨或电动打磨,然后要补高强度腻子,腻子以挑丝不倒为准。涂刷面漆时,需先用细砂纸打磨平整。
Construction specification 2. wood paint mixing Grassroots: Wood primary processing, in addition to clean up the debris on the base, but also to deal with local putty patching, a sandpaper to polish along the grain. In brushing paint, paint application (shellac) to knot a larger color and wood resin packaging processing. In the grass-roots Tu oil or parked, brushing oil layer evenly to all parts of brush times do not leak brush brush. After the oil is dry and polished, the first putty is full, after dry grinding or electric grinding with manual sand paper, and then the high strength putty is made up, and the putty can not be taken as a choice. When the finish is painted, it is necessary to use fine sandpaper for grinding and leveling. |
