Slant hole钻杆钳-拧扣机生产厂家-盐城特达钻采设备有限公司
本系列钻杆钳适用于石油、矿场钻井作业。使用本钳能起到安全、省力,提高钻井施工效率。本钳具有以下特点:
背钳夹紧及换档采用压缩空气(ZQ162/50A,ZQ203/75X,ZQ203/100,ZQ203/125);
旋扣钳和扭矩钳一体结构(ZQ162/50A,ZQ203/75X,ZQ203/100,ZQ203/125);
可不停车换档(ZQ162/50A,ZQ203/75X,ZQ203/100,ZQ203/125);
新旧接头均卡紧可靠;
正反方向都可产生**扭矩和转速(除CHKQ203/75外)。
注:ZQ203/75X和ZQ203/145X型采用行星爪夹紧机构,在适应范围内不需要更换任何零件。
CHKQ203/75型为斜井钻机专用钻井钳,钳体**移送距离700 mm,钳体升降范围0~360 mm,一次冲扣转角30°,适应斜井角度0~45°。
The Drill Pipe Tong is applicable in the petroleum and mine drilling, it is safety and labor saving, and improving the working efficiency. The tongs have the following features:
Using pneumatic power to shift and drive backup tong (ZQ162/50A,ZQ203/75X,ZQ203/100,ZQ203/125).
It is a integral mechanism made by spin tong and torque tong(ZQ162/50A,ZQ203/75X,ZQ203/100,ZQ203/125).
Changing gear allowed during operation(ZQ162/50A,ZQ203/75X,ZQ203/100,ZQ203/125).
New or old drilling pipe joint could be clamped reliably
Both directions could run the maximum torque and rotation speed(except CHKQ203/75).
Remark:Model ZQ203/75X and ZQ203/145X: using planet claw, needn’t to change any parts in application range.
Model CHKQ203/75 drill pipe tong used Specifically for slant hole drilling rig,maximum thrust distance of tong is 27″.Rise and fall range of the tong is 0~14″.Washed-up corner one time is 30°.The available corner of inclined well is 0~45°.
盐城特达___Slant hole钻杆钳-拧扣机生产厂家-盐城特达钻采设备有限公司 |