|
卧式射出成型机直销 卧式射出成型机现货供应 捷和供
机台特点：
1力學設計：機座采用特殊力學設計，平面精度佳，制成品外觀美，品質佳。
2.入料系統：特殊二段式入料設計，能使原料得到**排氣效果，又不死料之功能。
3.射出量控制：采用高精密度德制電子尺設計，能準確的控制與計算射出量之大小。
4.轉射板設計：具特殊的座進，座退功能，可使射嘴不死料。清料容易，品質穩定。
5.安全設計：備有日制高科技紅外線安全電眼，並具有全自動警告系統及多重安全防護裝置，可清楚掌握機臺狀況，確保安全。
6.油路設計：采用全比例式油路系統，低噪音並具有自動調整壓力大小比例之功能，精確穩定。
Characteristics of the machine:
1.?Mechanics design :The base adopts special mechanics design and the precision of the horizon is more accurate.The appearance of the machine is more beautiful as the high quality.
2.?Material supply system :A special design of two-stage material supply is employed . It expels bubble out in the most effective way . and no dead material left in the injection system .
3.?Injection volume control : optical ruler made in Germany is employed . The injection volume can be calculated and controlled precisely .
4.?Turn shoot board design : It can avoid the shoot mouth from generating dead material , and it is easy to clear up the material to keep the quality of controlled precisely .
5.?Security design :A light curtain made in Japan is available . And an automatic warning system is also to clear up the monitors the status of machine in order to extra provide extra protection to assure the operation safety for operatora.
6.?Circuit board design : A full-scale oil system is adopted . The noise is low and the pressure is adjusted automatically and proportionally .It is very accurate and stable .
1.机型：200Ton/ 300Ton/ 400Ton
2.出力（Ton)：200/300/400
3.行程（mm）：480/550/550
4.台面（mm）：503*508/580*600/700*700
5.缸径（mm）：355/450/500
6.射出量（cc）：1500/2000/3000/4000
7.马力（hp）：15/20/20
8.开模形式：上升下降-出人模-2RT-3RT-4RT Up/Down-In/2RT-3RT-4RT
9.单轴电热（kw）：16/18/28
10.总电力（kw）：27/33/44
11.重量（kg）：6800/9000/11000
12.机台尺寸（M）：3.2*2.35*2.45/3.2*2.35*2.8/3.98*2.6*2.8
固定电话：0512-65901000
联系方式：18112520510
400电话：400-0512-083
在线QQ：2844764628
公司网址：www.szjhsy.com |
