|
Application field
UTP DUR 600 is universally applicable for cladding on parts of steel, cast steel and high Mn-steel,
subject simultaneously to abrasion, impact and compression. Typical application fields are the
earth moving and stone treatment industry, e.g. excavator teeth, bucket knives, crusher jaws and
cones, mill hammers etc., but also for cutting edges on cold cutting tools. The deposit is machinable
by grinding only.
Hardness of the pure weld deposit 56 - 58 HRC
After soft-annealing 780 - 820° C / oven approx. 25 HRC
After hardening 1000 - 1050° C / oil approx. 60 HRC
1 layer on high Mn-steel approx. 22 HRC
2 layers on high Mn-steel approx. 40 HRC |
