无锡走廊楼梯地坪价格是多少 400-0709-910(请拨打400-0709-910电话,永坚地坪公司)
土地面或金钢砂硬化剂地面,
**表面的油污、涂料和松散结构等影响渗透的物质,然后彻底清扫地面。
3、对过于干燥的旧地面,使用清洁水充分润湿混凝土表面。
4、使用混凝土密封固化剂干粉剂按1:5--1:10比例兑水均匀泼洒在地面上,期间必须使各面都有均匀浸泡到材料。
5、当气温较高时,表面的硬化剂由于水份蒸发的原因很快变粘稠,可喷涂少量水稀释变稠的硬化剂,但用量不宜过多。
6、完成上述步骤下一步进行打磨,可使用50#到3000#水磨片循环打磨,每次打磨并根据现场情况浸泡材料。
7、养护:干燥24小时后地面可步行开放,正常使用应养护七天后再投入使用。渗透的硬化剂**成分逐渐与水泥反应,经常使用湿拖把清洁地面能促进渗透到混凝土内部的凝胶继续反应,行驶轻型车辆。
(5)地面强度完全达到70-90N/mm2需在28天以上。
(6)在28天以内,应避免金属物体直接撞击地面,也不可在地面上拖移,以避免刮出划痕。 四、地面建造工程
不同行业对地面有不同的使用要求,可以综合考虑地面的经济性和适用性为不同行业提供不同的地面设计建造方案。
基层混凝土浇筑质量是超硬混凝土地面的质量基础,混凝土的准备和施工可根据设计院的设计要求来定,由土建施工单位进行。混凝土地面浇筑时平整度一定要予以保障,锂基渗透性液体硬化剂/封地剂材料系统并不增加地面厚度,无法以此来控制地面的平整度。 现代化的工厂对于地坪的要求是非常高的,例如选择普通的水泥地坪,工作中产生的扬尘不仅有害于员工的身体健康,亦会造成对精密仪器的损害,甚至影响产品质量水平。因此,几乎所有的现代化工厂都会选择不同的环氧地坪涂装系统以适应其不同环境的需要。尚地环氧地坪漆厂针对上述需求开发了专用于现代化厂房室内地面的环氧平涂地坪系统,该系统拥有较高的附着力和附载性,并兼具强韧耐磨平整光洁及成本经济等优点。
环氧平涂地坪的适用范围:
环氧平涂地坪适用于无重载的工业厂房,如电子电器、机械、化工、医药、纺织、服装、烟草等行业,仓库、超市、停车场等其他特殊场所,所有的水泥或水磨石地面。有净化要求的无尘墙面天花板的涂饰等。
环氧平涂地坪性能特点:
环氧平涂地坪外观平整亮丽色彩多样,便于清洁维护方便。附着力强柔韧性好抗冲击。优异的耐磨性。环氧地坪施工快捷、成本经济。
Land surface or emery hardener ground,
Clear penetration of substances affect surface oil, paint and loose structure, then thoroughly clean the floor.
3, the old ground is too dry, use clean water to fully wet the concrete surface.
4, use concrete sealer dry powder of 1: 5-1: 10 ratio watered evenly sprinkle on the ground, during the respective surface must have a uniform soaked into the material.
5, when the temperature is high, the surface of the hardener quickly due to water evaporation becomes sticky, spray a small amount of water can dilute the thickened hardener, but the amount should not be excessive.
6, the completion of the grinding step Next, use 50 # to 3000 # sheet mill cycle grinding, polishing each and immersed material according to the site.
7, conservation: dry for 24 hours after the ground is within walking distance open, normal use should conserve seven days and then put into use. Hardener penetration of the active ingredient gradually and cement reaction, often with a damp mop to clean the floor can promote penetration into the concrete inside the gel continue to react, with light vehicles.
(5) Ground strength fully meet 70-90N / mm2 need more than 28 days.
(6) Within 28 days, they should avoid metal objects directly hit the ground, and do not drag on the ground, to avoid scraped scratches. Fourth, the ground construction
Different industries have different ground requirements may take into consideration economic and applicability of the ground floor designed and built to provide different solutions for different industries.
Quality is the quality of the grass-roots foundation concrete pouring the concrete floor of superhard, preparation and construction of the concrete can be designed according to the requirements of a given Institute, carried out by the civil construction units. Flatness must be safeguards when pouring the concrete floor, lithium-based liquid permeability hardener / manor binder material system does not increase the thickness of the ground, unable to control the flatness of this ground. The modern factory for flooring requirements are very high, for example, choose an ordinary cement floor, dust the work produced not only harmful to the health of employees, may also cause damage to precision instruments, and even affect the quality of products. Thus, almost all of the modern factory would choose a different epoxy floor coating system to suit their needs of different environments. Still be demand for the above epoxy floor paint factory dedicated to the development of modern factories epoxy floor flat interior floor coating system, which has a high adhesion and attached sex, and both toughness and wear flat and smooth costs and economic advantages.
Epoxy floor coating level of Scope:
Epoxy floor coating level applicable to other special places without overloading industrial plants, such as electronic appliances, machinery, chemicals, pharmaceuticals, textiles, clothing, tobacco and other industries, warehouses, supermarkets, car parks, etc., all of cement or terrazzo floor . There the purification required finishing clean walls ceilings and the like.
Tu Ping epoxy floor Features:
Epoxy floor coating flat smooth appearance bright color variety, easy to clean and easy to maintain. Flexibility, impact resistance and good adhesion. Excellent wear resistance. Epoxy construction speed, cost economy.
资讯来源:<联系电话:400-0709-910>
|