无锡商场地坪 400-0709-910(请拨打400-0709-910电话,永坚地坪公司)
凡是环氧地坪在建造后半年内损坏的,40%是涂料质量劣质或施工错误,60%是素地有严重问题或处理不当,而素地处理不当主要包括混凝土地面浇铸屋基不合格和修补处理、底涂施工不当。素地处理在环氧树脂地坪施工中最容易被忽视,其实却是**个重要的环节;如果处理不好将使地坪工程失去“基础”。环氧地坪厚度一般为3~5mm,强度再高也只不过是覆盖在混凝土素地上的高分子地板,而真正受力的最终还是混凝土素地,环氧地板附着力再强,素地脱层了根生何处?
武汉锦秀地坪专家在多次处理有问题的地坪过程中发现,业主普遍有一个误解,认为既然是要做环氧地坪,混凝土浇注地坪质量差一点没有关系、反正是要处理的,所以既不严格提出标准、也无检查顺序;而混凝土施工者则认为,反正会盖住的、质量差点不要紧;再加上地坪施工者认为,接到一个项目不容易,不管什么地坪都照做,涂上盖住就行了。因此几乎所有施工成本报价中,极少有素地处理的成本预算,仅提出按要求修补好,成本很低或者干脆没有费用。更有甚者,一些不正规的施工队伍不懂什么叫素地质量标准及其重要性,更不知道如何进行素地处理。而正是这被很多人忽视的素地处理,成为损伤环氧地坪的最主要杀手。
所以无论什么高聚合物地坪,素地处理都是重中之重。施工方案从确保质量出发应抓住以下要点:一是混凝土地面、表面处理及素地缺陷修复,包括混凝土素地质量评估、缺陷修补、常规表面处理等环节;二是封底层的制作。施工人员在封底施工时首先要掌握素地的浸润度和饱和程度,进行针对性的封底,混凝土强度不够的要进行加固;旧地坪遭到酸碱或其它化学性物质腐蚀的须进行饱和性覆涂,素地曾做过水磨石或其它硬化处理或特别光滑的要提高涂层附着力;另一个注意点是,采用低溶剂、低黏度有一定渗透力环氧底涂料施涂
Any epoxy floor construction within six months after the damage to the inferior quality of 40% is paint or construction errors, 60% of prime land have serious problems or mishandling, and improper handling of prime land including concrete floor casting failure and repair process Wuji improper primer construction. Su handled most easily overlooked in the epoxy floor construction, but it is the first important step; if not handled properly flooring project will lose "basic." Epoxy thickness is 3 ~ 5mm, high intensity and then it is only covering the concrete floor polymer plain ground, but the real force of eventually concrete elements, the epoxy floor again strong adhesion, delamination of prime land Where roots?
Wuhan Jin Xiu Ping experts have repeatedly deal with the problem found during the floor, the owners generally have a misconception that since it is done epoxy floor, floor concrete pouring quality almost does not matter, anyway, it is to be treated Therefore neither proposed strict criteria, and no inspection order; and concrete those who think that, anyway, would be covered, quality almost does not matter; plus floor construction believe, received a project is not easy, no matter what floor all did, painted cover on the line. Therefore, the offer almost all construction costs, the cost of a well-established to deal with a shoestring budget, put forward only repaired as required, very low cost or no cost altogether. Moreover, some informal construction team do not know what factors to quality standards and their importance, but do not know how to handle the elements. And it was a lot of people overlook this prime handled become the main killer of injury epoxy floor.
So no matter what the high polymer flooring, are the most important elements to the process. Starting from the construction program to ensure the quality should seize the following points: First, the concrete floor, surface treatment and elements to the bug fixes, including concrete prime land quality assessment, bug fixes, and other aspects of conventional surface treatment; the second is the production of bottom seal. Construction workers at the construction of the first to grasp the back cover of infiltration and saturation level of prime land, targeted back, concrete strength is not enough to be reinforced; old floor was acid or other corrosive chemical substances shall conduct saturation recoat , prime land has done terrazzo or other hardened or special smooth coating to improve adhesion; Another note is that the use of low solvent, low viscosity epoxy certain penetration primer was applied
资讯来源:<联系电话:400-0709-910>
|