PA66 FR50 NC010A美国杜邦Zytel® 25%玻纤增强阻燃级聚酰胺66尼龙塑料（18024445500）
Zytel® FR50 NC010A is a 25% glass fiber reinforced, flame retardant polyamide 66 resin for injection molding.
General information Value Unit Test Standard
Resin Identification PA66-GF25FR(17) - -
Part Marking Code >PA66-GF25FR(17) - ISO 11469
<
Rheological properties dry / cond Unit Test Standard
Moulding shrinkage, parallel 0.3 / * % ISO 294-4, 2577
Moulding shrinkage, normal 0.8 / * % ISO 294-4, 2577
Mechanical properties dry / cond Unit Test Standard
Tensile Modulus 10640 / 7500 MPa ISO 527-1/-2
Stress at break 170 / - MPa ISO 527-1/-2
Strain at break 2.5 / - % ISO 527-1/-2
Flexural Modulus 9450 / - MPa ISO 178
Charpy impact strength, 23°C 40 / - kJ/m&sup2; ISO 179/1eU
Charpy notched impact strength ISO 179/1eA
23°C 11.3/- kJ/m&sup2;
-40°C 10.8/- kJ/m&sup2;
Thermal properties dry/cond Unit Test Standard
Melting temperature, 10°C/min 261/* °C ISO 11357-1/-3
Glass transition temperature, 10°C/min 80/- °C ISO 11357-1/-2
Temp. of deflection under load ISO 75-1/-2
1.8 MPa 246 / * °C
0.45 MPa 256 / * °C
Coeff. of linear therm. expansion, parallel 19 / * E-6/K ISO 11359-1/-2
Coeff. of linear therm. expansion, normal 100 / * E-6/K ISO 11359-1/-2
Thermal conductivity of melt 0.22 W/(m K) -
Spec. heat capacity of melt 1660 J/(kg K) -
RTI, electrical UL 746B
0.75 mm 130 / * °C
1.5mm 130 / * °C
3mm 130 °C
RTI, impact UL 746B
0.75 mm 105 °C
1.5mm 115 / * °C
3mm 115 °C
RTI, strength UL 746B
0.75 mm 105 °C
1.5mm 115 / * °C
3mm 120 °C
Flammability dry/cnd Unit Test Standard
Burning Behav. at 1.5mm nom. thickn. V-0/* class IEC 60695-11-10
Thickness tested 1.5/* mm IEC 60695-11-10
UL recognition UL/* - -
Burning Behav. at thickness h V-0/* class IEC 60695-11-10
Thickness tested 0.35/* mm IEC 60695-11-10
Burning Behav. 5V at thickness h 5VA/* class IEC 60695-11-20
Thickness tested 1.5/* mm IEC 60695-11-20
UL recognition UL/* - -
Glow Wire Flammability Index IEC 60695-2-1/2
0.75mm 960 / - °C
1.5mm 960 / - °C
3mm 960 / - °C
Glow Wire Ignition Temperature IEC 60695-2-1/3
0.75mm 900/- °C
1.5mm 900/- °C
3mm 930/- °C
Flammability, 3.0mm V-0/* - IEC 60695-11-10
Electrical properties dry/cond Unit Test Standard
Relative permittivity, 1MHz 3.8/- - IEC 60250
Dissipation factor IEC 60250
100Hz 180/- E-4
1MHz 180/- E-4
Volume resistivity >1E13/- Ohm*m IEC 60093
Electric strength 38/- kV/mm IEC 60243-1
Comparative tracking index
Comparative tracking index 285 / - - IEC 60112
CTI, 23°C 2 / - PLC UL 746A
Other properties dry / cond Unit Test Standard
Humidity absorption, 2mm 0.7 / * % Sim. to ISO 62
Density 1600 / - kg/m&sup3; ISO 1183
Density of melt 1400 kg/m&sup3; -
VDA Properties Value Unit Test Standard
Emission of organic compounds 4.7 &micro;gC/g VDA 277
Odour 4.5 class VDA 270 |
