PA66 E51HSB NC010美国杜邦热稳定高分子量聚酰胺66尼龙塑料（18024445500）
Zytel® E51HSB NC010 is a high molecular weight, heat stabilised polyamide 66 resin for injection moulding and extrusion.
General information Value Unit Test Standard
Resin Identification PA66 - -
Part Marking Code >PA66< - ISO 11469
Rheological properties dry / cond Unit Test Standard
Viscosity number 330 / * cm&sup3;/g ISO 307, 1157, 1628
Moulding shrinkage, parallel 1.3 / * % ISO 294-4, 2577
Moulding shrinkage, normal 1.3 / * % ISO 294-4, 2577
Mechanical properties dry / cond Unit Test Standard
Tensile Modulus 3100 / 1200 MPa ISO 527-1/-2
Yield stress 84 / 55 MPa ISO 527-1/-2
Yield strain 4.3 / 29 % ISO 527-1/-2
Nominal strain at break 35 / - % ISO 527-1/-2
Strain at Break, 23°C, 50mm/min >50 / - % ISO 527-1/-2
Flexural Modulus 2800 / - MPa ISO 178
Charpy impact strength, 23°C N / - kJ/m&sup2; ISO 179/1eU
Charpy notched impact strength ISO 179/1eA
23°C 7/21 kJ/m&sup2;
-30°C 6/4 kJ/m&sup2;
Izod notched impact strength, 23°C 6/- kJ/m&sup2; ISO 180/1A
Thermal properties dry/cond Unit Test Standard
Melting temperature, 10°C/min 262/* °C ISO 11357-1/-3
Temp. of deflection under load ISO 75-1/-2
1.8 MPa 70 / * °C
0.45 MPa 200 / * °C
Vicat softening temperature, 50°C/h, 50N 221 / * °C ISO 306
Thermal conductivity of melt 0.16 W/(m K) -
Spec. heat capacity of melt 2790 J/(kg K) -
Flammability dry / cond Unit Test Standard
Oxygen index 20 / * % ISO 4589-1/-2
Electrical properties dry / cond Unit Test Standard
Volume resistivity >1E13 / 1E11 Ohm*m IEC 60093
Comparative tracking index 600 / - - IEC 60112
Other properties dry / cond Unit Test Standard
Humidity absorption, 2mm 2.6 / * % Sim. to ISO 62
Water absorption, 2mm 8.5 / * % Sim. to ISO 62
Density 1140 / - kg/m&sup3; ISO 1183
Density of melt 980 kg/m&sup3; - |
