PA66 70G43HSLA BK099美国杜邦Zytel® 43%玻璃纤维增强热稳定聚酰胺66塑料（18024445500）
Zytel® 70G43HSLA BK099 is a 43% glass fiber reinforced, heat stabilized, black polyamide 66 resin for injection moulding.
General information Value Unit Test Standard
Resin Identification PA66-GF43 - -
Part Marking Code >PA66-GF43< - ISO 11469
Rheological properties dry / cond Unit Test Standard
Viscosity number 120 / * cm&sup3;/g ISO 307, 1157, 1628
Moulding shrinkage, parallel 0.3 / * % ISO 294-4, 2577
Moulding shrinkage, normal 0.9 / * % ISO 294-4, 2577
Mechanical properties dry / cond Unit Test Standard
Tensile Modulus 14000 / 11000 MPa ISO 527-1/-2
Stress at break 225 / 160 MPa ISO 527-1/-2
Strain at break 2.5 / 3.5 % ISO 527-1/-2
Charpy impact strength, 23°C 90 / 95 kJ/m&sup2; ISO 179/1eU
Charpy notched impact strength, 23°C 16 / 18 kJ/m&sup2; ISO 179/1eA
Puncture energy, 23°C 4.4 / - J ISO 6603-2
Izod notched impact strength, 23°C 14 / 16 kJ/m&sup2; ISO 180/1A
Thermal properties dry / cond Unit Test Standard
Melting temperature, 10°C/min 262 / * °C ISO 11357-1/-3
Glass transition temperature, 10°C/min 80 / - °C ISO 11357-1/-2
Temp. of deflection under load ISO 75-1/-2
1.8 MPa 255 / * °C
0.45 MPa 258 / * °C
Thermal conductivity of melt 0.25 W/(m K) -
Flammability dry / cond Unit Test Standard
Oxygen index 24 / * % ISO 4589-1/-2
Electrical properties dry / cond Unit Test Standard
Dissipation factor IEC 60250
100Hz 130/- E-4
1MHz 150/- E-4
Volume resistivity >1E13/- Ohm*m IEC 60093
Electric strength 25/- kV/mm IEC 60243-1
Comparative tracking index 600/- - IEC 60112
Other properties dry/cond Unit Test Standard
Humidity absorption, 2mm 2.2/* % Sim. to ISO 62
Water absorption, 2mm 7.6/* % Sim. to ISO 62
Density 1490/- kg/m&sup3; ISO 1183 |
