K38系列(增量式)旋转编码器
增量式(通用型,空心轴)
外形尺寸：体积小,外径Φ38mm,厚度为39mm
轴 径：Φ8mm半空(其它轴径可选Φ5mm;Φ6mm)
连接方式: 线后出和线侧出
输出形式: 集电极开路、电压、互补和差分输出（长线驱动26LS31）
分 辨 率：可达2500P/R
电源电压：可选①DC5V；②DC8V-24V
防护等级：IP50
线 长：1M（可根据需要适当加长电缆长度，费用另算）
外罩质地：铝
重 量：约139g(包装状态)
K38 series (incremental type) Rotary encoder
Incremental type (general type, hollow shaft)
External dimensions : Small volume, external diameter : Φ38mm, thickness : 39mm
shaft diameter : Φ8mm half hollow (other optional : Φ5mm;Φ6mm;Φ10mm)
Outlet type : wire out from back and wire out from side
Output mode : Collector open circuit output , voltage output , complementary output and difference output (long wire drive 26LS31)
Resolution : up to 2500P/R
Supply voltage : Optional : DC5V,DC5V-12V,DC12V-24V
Protection grade : IP50
Wire length : 1M (Wire length could be added appropriately by require , but it need payment individually)
Crust : aluminum
Weight : about 139g (with package) |
