PA6 1021ST法国罗地亚TECHNYL高冲击强度保龄酒瓶直排轮滑鞋用尼龙6塑料（18024445500）
Characteristics Tets method Unit d.a.m*. Cond.**
Physical
Moisture adsorption, 24h in water at 23°C ISO 62 % 1.20 -
Density ISO 1183 g/㎤ 1.06 -
Mold shrinkage (longitudinal) RHODIA-EP % - -
Mold shrinkage (transverse) RHODIA-EP % - -
Mechanical
Tensile strength at yield ASTM D638 MPa 50 -
Elongation at break ASTM D638 % 200 -
Flexural stress at break ASTM D790 MPa 65 -
Flexural modulus ASTM D790 MPa 1900 -
Izod notched impact strength ASTM D256 J/m 1100 -
Rockwell hardness ASTM D786 R-Scale 110 -
Flammable
UL94 Flammability ISO 1210 / UL 94 - HB -
Thermal
Melt Temperature ISO 11357 ℃ 222 -
Heat Deflection Temperature 1.82 MPa ASTM D648 ℃ 50 -
Heat Deflection Temperature 0.45 MPa ASTM D648 ℃ 120 -
Electrical
Relative permitivity IEC60250 - 3.5 4
Dissipation factor 1MHz IEC60250 - 0.02 0.12
Volume resistivity IEC60093 Ohm.cm 10E14 10E10
Surface resistivity IEC60093 Ohm 10E12 10E10
Dielectric strength IEC 60243 kV/m - 18
Comparative tracking index sol. A IEC60112 Volt 600 -
在线订购： |
