PA6 73G30T NC010美国杜邦Zytel 30%玻纤增强增韧尼龙6树脂注塑成型（18024445500）
General information Value Unit Test Standard
Resin Identification PA6-IGF30 - -
Part Marking Code >PA6-IGF30< - ISO 11469
Rheological properties dry / cond Unit Test Standard
Viscosity number 135 / * cm&sup3;/g ISO 307, 1157, 1628
Moulding shrinkage, parallel 0.2 / * % ISO 294-4, 2577
Moulding shrinkage, normal 1.0 / * % ISO 294-4, 2577
Mechanical properties dry / cond Unit Test Standard
Tensile Modulus 9100 / 5700 MPa ISO 527-1/-2
Stress at break 170 / 110 MPa ISO 527-1/-2
Strain at break 3 / 6 % ISO 527-1/-2
Flexural Modulus 9000 / 5700 MPa ISO 178
Charpy impact strength ISO 179/1eU
23°C 100 / 100 kJ/m&sup2;
-30°C 100 / 94 kJ/m&sup2;
Charpy notched impact strength ISO 179/1eA
23°C 20 / 25 kJ/m&sup2;
-30°C 13 / 12 kJ/m&sup2;
Izod notched impact strength ISO 180/1A
23°C 17 / 24 kJ/m&sup2;
-30°C 42350 kJ/m&sup2;
Izod impact strength, 23°C 80 / 80 kJ/m&sup2; ISO 180/1U
Thermal properties dry / cond Unit Test Standard
Melting temperature, 10°C/min 221 /* °C ISO 11357-1/-3
Temp. of deflection under load ISO 75-1/-2 |
