PA6 B 31 SK 000000德国朗盛Durethan吸尘器外壳玩具用尼龙6塑料（18024445500）
PA 6, non-reinforced, injection molding
ISO/ ASTM
ISO Shortname: ISO 1874-PA 6, GR, 14-030,
Property Test Condition Unit Standard guide value
d.a.m. cond.
Rheological properties
C Melt volume-flow rate 260 °C; 5 kg cm³/(10 min) ISO 1133-1 110
Molding shrinkage, parallel 150x105x3; 280 °C / MT 80 °C; 400 bar % acc. ISO 2577 0.9
Molding shrinkage, transverse 150x105x3; 280 °C / MT 80 °C; 400 bar % acc. ISO 2577 1.1
Post- shrinkage, parallel 150x105x3; 120 °C; 4 h % acc. ISO 2577 0.15
Post- shrinkage, transverse 150x105x3; 120 °C; 4 h % acc. ISO 2577 0.15
Mechanical properties (23 °C/50 % r. h.)
C Tensile modulus 1 mm/min MPa ISO 527-1,-2 3500 1100
C Yield stress 50 mm/min MPa ISO 527-1,-2 85 50
C Yield strain 50 mm/min % ISO 527-1,-2 4.0 20
C Nominal strain at break 50 mm/min % ISO 527-1,-2 10 > 50
C Tensile creep modulus 1 h MPa ISO 899-1 900
C Tensile creep modulus 1000 h MPa ISO 899-1 700
C Charpy impact strength 23 °C kJ/m² ISO 179-1eU N N
C Charpy impact strength -30 °C kJ/m² ISO 179-1eU N N
C Charpy notched impact strength 23 °C kJ/m&sup2; ISO 179-1eA < 10 25
C Charpy notched impact strength -30 °C kJ/m&sup2; ISO 179-1eA < 10 < 10 |
