PA66 25WSPÃÀ¹úÊ×ŵVydyne®¸ßÁ÷¶¯ÄͺòÐÔµçÀÂÔú´øÊø´øÓÃÄáÁú66ËÜÁÏ£¨18024445500£©
Physical Dry Conditioned Unit Test Method
Density 1.14¡¡-- g/cm³ ISO 1183
Molding Shrinkage ¡¡ ¡¡ ¡¡ ISO 294-4
Across Flow : 23¡ãC, 2.00 mm 1.4¡¡-- % ¡¡
Flow : 23¡ãC, 2.00 mm 1.6¡¡-- % ¡¡
Water Absorption (23¡ãC, 24 hr) 1.2¡¡-- % ISO 62
WaterAbsorption (Equilibrium, 23¡ãC, 50% RH) 2.4¡¡-- % ISO 62
Outdoor Suitability f1 --¡¡ UL 746C
Mechanical Dry Conditioned Unit Test Method
Tensile Modulus (23¡ãC) 3400¡¡1550¡¡MPa ISO 527-2
Tensile Stress (Yield, 23¡ãC) 83.0¡¡77.0¡¡MPa ISO 527-2
Tensile Strain (Yield, 23¡ãC) 4.5¡¡25¡¡% ISO 527-2
Nominal Tensile Strain at Break (23¡ãC) 20¡¡60¡¡% ISO 527-2
Flexural Modulus (23¡ãC) 3100¡¡1400¡¡MPa ISO 178
Flexural Strength (23¡ãC) 87.0¡¡22.0¡¡MPa ISO 178 |