PA66 A 30H1 V30 NATURAL法国罗地亚TECHNYL 30%玻纤增强开关定时器接触器用尼龙66塑料（18024445500）
TECHNYL A 30H1 V30 NATURAL
Properties
Typical values of properties are for natural grades
Standards Unit Values
d.a.m. Cond.
Physical
Water absorption(24h at 23°C) ISO 62 % 0,80
Density ISO 1183/A g/cm3 1,57
Molding shrinkage Parallel RHODIA % 0,60
Molding shrinkage normal or perpendicular RHODIA % 0,95
Molding Shrinkage Isotropy RHODIA 0,63
Mechanical
Tensile Modulus ISO 527 Type 1A MPa 10000 7000
Tensile strength at break ISO 527 Type 1A MPa 130 95
ASTM D-638 MPa 140
Elongation at break ISO 527 Type 1A % 2,20 3,50
ASTM D-638 % 2,50
Flexural modulus ISO 178 MPa 9500 7000
ASTM D-790 MPa 9500
Flexural maximum stress ISO 178 MPa 200 170
ASTM D-790 MPa 200
Charpy notched impact strength (23 °C) ISO 179/1eA kJ/m2 9,5 12
Charpy unnotched impact strength (23 °C) ISO 179/1eU kJ/m2 42 50
Izod notched impact strength (23 °C) ISO 180/1A kJ/m2 10 13
ASTM D256 J/m 115
Flammability
Flammability (Thickness: 0,8 mm) ISO 1210 / UL94 V0
Flammability (Thickness: 1,6 mm) ISO 1210 / UL94 V0
Flammability (Thickness: 3,2 mm) ISO 1210 / UL94 V0
Glow Wire Flammability Index (Thickness: 0,8 mm) ISO 60695-2-12 °C 960
Glow Wire Flammability Index (Thickness: 1,6 mm) ISO 60695-2-12 °C 960
Glow Wire Flammability Index (Thickness: 3,2 mm) ISO 60695-2-12 °C 960
Glow Wire Ignition Temperature (Thickness: 0,8 ISO 60695-2-13 °C 800
mm)
Glow Wire Ignition Temperature (Thickness: 1,6 ISO 60695-2-13 °C 825
mm)
Limit Oxygen Index ISO 4589 31
Fire and Smoke index NF F 16 101 I3 / F3
Thermal
Melting Temperature ISO 11357 °C 263
Heat deflection temperature (1,8 MPa) ISO 75/Af °C 226
ASTM D-648 °C 227
Electrical
Comparative tracking index (Sol A) IEC 60112 V 450 600
Comparative tracking index (Sol B) IEC 60112 V 400 500
Dielectric strength IEC 60243 kV/mm 42 40
Dissipation factor IEC 60250 0,010 0,050
Relative permittivity IEC 60250 3,30 3,60
Surface resistivity IEC 60093 Ohm 1E 14
Volume resistivity IEC 60093 Ohm/cm 1E 15 |
